|
cAP ax - Modern quad-core CPU, 1GB of RAM, 2x Gigabit Ethernet ports, PoE, Gen 6 802.11ax wireless, PSU – included!
With the Generation6 802.11ax wireless standard, the cAP ax access point reaches up to 40% higher speed in the 5 GHz and up to 90% higher speed in the 2.4 GHz spectrum.
The ceiling access point is a great way to prevent signal loss in large, crowded areas with many obstacles.
The cAP ax is a reliable, flexible and cost-effective solution, offering the most stable and uninterrupted signal. cAP ax features a modern quad-core CPU running at 1.8 GHz, NAND storage, a gigabyte of RAM and the most powerful networking software on the market – RouterOS v7.
The cAP ax supports complex firewall rules, IPsec hardware encryption, Wireguard, BGP, advanced routing and multiple remote work VPN tunnels.
cAP ax is a great way to make your office network installation and maintenance much easier, as it features PoE-in and PoE-out. You can use cAP ax to power other devices, such as network switches, CCTV cameras, or another cAP ax. The 48V PSU is included, so you can power your IP-cameras or another cAP ax right out of the box.
|
Specidications : |
|
Product code |
cAPGi-5HaxD2HaxD |
|
Architecture |
ARM 64bit |
|
CPU |
IPQ-6010 |
|
CPU core count |
4 |
|
CPU nominal frequency |
auto (864 - 1800) MHz |
|
Switch chip model |
IPQ-6010 |
|
RouterOS license |
4 |
|
Operating System |
RouterOS (v7 only) |
|
Size of RAM |
1 GB |
|
Storage size |
128 MB |
|
Storage type |
NAND |
|
MTBF Approximately |
200.000 hours at 25°C |
|
Tested ambient temperature |
-40°C to 70°C |
|
IPsec hardware acceleration |
Yes |
|
Wireless capabilities |
|
Wireless 2.4 GHz Max data rate |
574 Mbit/s |
|
Wireless 2.4 GHz number of chains |
2 |
|
Wireless 2.4 GHz standards |
802.11g/n/ax |
|
Antenna gain dBi for 2.4 GHz |
6 |
|
Wireless 2.4 GHz chip model |
QCN-5022 |
|
Wireless 2.4 GHz generation |
Wi-Fi 6 |
|
Wireless 5 GHz Max data rate |
1200 Mbit/s |
|
Wireless 5 GHz number of chains |
2 |
|
Wireless 5 GHz standards |
802.11a/n/ac/ax |
|
Antenna gain dBi for 5 GHz |
5.5 |
|
Wireless 5 GHz chip model |
QCN-5052 |
|
Wireless 5 GHz generation |
Wi-Fi 6 |
|
WiFi speed |
AX1800 |
|
Ethernet |
|
10/100/1000 Ethernet ports |
2 |
|
Number of 1G Ethernet ports with PoE-out |
1 |
|
Powering |
|
Number of DC inputs |
2 (DC jack, PoE-IN) |
|
DC jack input Voltage |
18-57 V |
|
Max power consumption |
28.2 W |
|
Max power consumption without attachments |
9 W |
|
Cooling type |
Passive |
|
PoE in |
802.3af/at |
|
PoE in input Voltage |
18-57 V |
|
PoE-out |
|
PoE-out ports |
Ether2 |
|
PoE out |
Passive PoE up to 57V |
|
Max out per port output (input 18-30 V) |
600 mA |
|
Max out per port output (input 30-57 V) |
400 mA |
|
Max total out (A) |
600 mA |
|
Total output current |
0.4 |
|
Total output power |
19.2 |
|
Certification & Approvals |
|
Certification |
CE, FCC, IC, EAC, ROHS |
|
IP |
20 |
|
Other |
|
CPU temperature monitor |
Yes |
|
Mode button |
Yes |
| Package Contents: |
|---|
| 1 x cAP ax
|
| 1 x 48V, 0.95A power adapter
|
| 1 x Gigabit PoE injector
|
| 1 x K-41 screw kit
|
| 1 x Ceiling mount |
|
